[comp.os.minix] Problems with PH version of Minix 1.5

feustel@well.sf.ca.us (David Alan Feustel) (10/03/90)

I just got the 3.5" Version of Minix 1.5 and have found problems with
the diskettes.
 
01	PC Boot Disk			- no boot sector
02	AT Boot Disk			- not formatted
03	Universal Boot Disk		- OK: System boots and runs but:
					  does not find real time clock.
04	Root File System		- boot sector is all zeroes
					  (can't diskcopy without dos media
					  descriptor byte)
05	System Binaries #1(/usr)	- ditto
06	System Binaries #2		- ditto
07	System Binaries #3		- ditto
08	Operating System Sources	- ditto
09	Commands Sources #1		- ditto
10	Commands Sources #2		- ditto
11	Networking Sources		- ditto
12	Boot Disk with ST506 Hard Disk	- OK: System boots and runs
					  in protected mode but:
					  does not recognize IDE controller.
					  does not find real time clock.
 
My Hardware Configuration:
	ALR SX386Z with 80387 NPX, 8 meg ram, 100 meg Conner IDE HD,
	Artisoft 2mb/sec Lan controller, Iomega 20 mb removeable hd,
	Logitech Mouse on com1, Anchor 2400 internal modem on com2.
	Runs all versions of IBM OS/2 (1.0,1.1,1.2). Disk formatted using
	IBM PCDOS 3.3 format command to 1 32 meg primary and 1 extended
	partition containing 3 32 meg and 1 smaller partitions.
	

-- 
Dave Feustel, 1930 Curdes Ave, Fort Wayne, IN 46805-2710 (219)-482-9631  
EMAIL:	feustel@well.sf.ca.us	{ucbvax,apple,hplabs,pacbell}!well!feustel	
BIX: feustel    COMPUSERV: 72730,566    MCIMAIL: dfeustel