greg@mobius.Viewlogic.COM (Gregory Larkin) (10/29/90)
Hi all,
I was unpacking my 1.3->1.5.10 upgrade kit the other day and noticed
that there are files with .crc and .crcdif extensions in each one.
How are the values of each number calculated (i.e. with what program).
It doesn't seem to be the sum(1) program (at least not the one I have).
Is there a "crc" program that I can get from an FTP site to check these
numbers?
Thanks,
--
Greg Larkin (ASIC Engineer)
Viewlogic Systems, Inc. (The CAE Company)
293 Boston Post Road West -------------------------------------
Marlboro, MA 01752 |"We've got captains not courageous,|
508 480 0881 x321 |captains tumbling into madness..." |
E-mail: greg@Viewlogic.COM |Peter Garrett, Midnight Oil |
-------------------------------------HBO043%DJUKFA11.BITNET@cunyvm.cuny.edu (Christoph van Wuellen) (10/30/90)
There is a crc program in the MINIX distribution. C.v.W.
cagney@chook.ua.oz (Andrew Cagney - aka Noid) (10/30/90)
From article <1990Oct29.094917@mobius.Viewlogic.COM>, by greg@mobius.Viewlogic.COM (Gregory Larkin): > Hi all, > > I was unpacking my 1.3->1.5.10 upgrade kit the other day and noticed > that there are files with .crc and .crcdif extensions in each one. > > How are the values of each number calculated (i.e. with what program). > It doesn't seem to be the sum(1) program (at least not the one I have). > Is there a "crc" program that I can get from an FTP site to check these > numbers? > The programs you are looking for are: crc - list crc's of files, left out of 1.3 by mestake :-( or much better: ccrc, check_crc, duck... - Wim's crc's sucessor able to quickly list & check crc's They are on the same ftp site as the patches. Noid