clk@splash.Princeton.EDU (Christopher Kranz) (02/17/91)
Before I start pulling my hair out I was wondering if somebody with a similar configuration has gotten minix up. I'm getting "Read Error: Automatic Reboot" when I attempt to boot from any of the boot disks. I know the disks are okay because I tried them out on a "real" PC at work and they boot just fine. My hardware configuration is as follows: Gateway 2000 386/33MHz Cache Special -Micronics 386 ASIC Cache System Motherboard -DFI, Inc. MIO-400KF multi I/O board IDE controller, dual floppy controller, game port, 2 serial ports, and a parallel port. -Western Digital Caviar 280 80MB IDE hard drive -1.2 MB 5.25 floppy drive -1.44 MB 3.5 floppy drive -Diamond Computer Systems, Inc. SpeedSTAR VGA adapter -Crystal Scan 1024 monitor If it turns out to be a hardware incompatibility what options (if any) do I have? Can anyone enlighten me? Any ideas? Help. Chris Kranz clk@gfdl.princeton.edu ------------------------------------------------------------------------------- Christopher L. Kranz GFDL Computer Systems Programmer P.O. Box 308 Geophysical Fluid Dynamics Laboratory Princeton, NJ 08542 ------------------------------------------------------------------------------- Internet Address: clk@gfdl.princeton.edu Commercial: (609)452-6585 UUCP Address: princeton!gfdl!clk FTS: 298-6585 FAX: (609)987-5063 ===============================================================================