sww@versatc.versatec.COM (Stephan Wendl x4389) (04/13/91)
I apologize to post this here but I don't seem to be able to
mail directly.
I recently posted a query regarding MicroProject DRAM boards
You were kind enough to answer and asked me to send details of
the board to you. My mail didn`t seem to go through. So here is
what I tried to send to you:
I have two 4MB VME boards. They have the Model numbers 2501-4240-0. There
are two jumper blocks between the P1 and P2 connectors. One block has 4 triples
the other one has 8 triples.
---------p2---------- .... ........ ----------p1----------
--------------------- .... ........ ----------------------
--------------------- .... ........ ----------------------
1234 12345678
I would appreciate if you could tell me how to use the jumpers and if there
are any software registers to write to for turning on/off parity checking,
interrupt vectors or etc. I am trying to use it in a SysV Heurikon VME system.
What about backplane jumpers for BGR0 and IACK. If you happen to have a user
manual, I would be interested in a copy. This is for my personal system and
not company related.
When responding, please email to versatc!sww.
Thank you again for your time and help.
stephan