ralf@ptavv.ka.sub.org (Ralf Wenk) (05/01/91)
In article <3084@krafla.rhi.hi.is> adamd@rhi.hi.is (Adam David) writes: > Just compiled 'term' on vanilla ST 1.5.10. > This is the term that was posted here recently. Seems to be the one I posted some days ago. > It worked fine once I modified the test for exit to accept character codes > one at a time. Before that the only way out was logout with CTRL-ALT-F10. I use ST 1.5.10.3 and I can leave term with F10. There was a problem with term on MINIX ST 1.1 because the escape sequence of F10 did not arrive at one pice. I fixed this for 1.1 but I reactivate term for 1.5 when running ST 1.5.10.2 and there F10 arrives in one pice as expected. As the ST 1.5.10.2 tty driver is the same as PC 1.5 (ST 1.5.10 isn't) I removed the "two pices" code. So try again with patchlevel >= 2, please. -- -- Ralf Wenk -- ralf@ptavv.ka.sub.org