greg@suntan.viewlogic.com (Gregory Larkin) (06/01/91)
Hi there, I posted this last week, but we were having problems with news, so I'm not sure if it got out. First off, thanks to all who helped me out with the /dev/port problem I was having. It now works great! However :-), for some reason, readclock(1) is the only program in V1.5 that I cannot compile. I am using the estdio library. Could this be the problem? Actually, I don't think readclock.c includes stdio.h at all, though. I get all sorts of link errors such as: portio.s -- expr syntax error (about 4 times) open.s -- I0013 multiple declared isatty.s -- I0013 multiple declared unresolved references: .c .s I0016 If I switch my libc.a to the vanilla 1.5 one (i.e. no estdio installed), readclock(1) links fine! Has anyone ever seen these messages before? Did I install estdio incorrectly? I haven't had any other problems; all of the other commands are fine, the /usr/test directory compiles fine and all tests pass, etc.... Any ideas? Thanks, -- Greg Larkin (ASIC Engineer)|"This is a fragile ball we are living on; Viewlogic Systems, Inc. |it's a miracle and we are destroying it.." 293 Boston Post Road West |Peter Garrett, Midnight Oil Marlboro, MA 01752 (greg@Viewlogic.COM)