liz@ames.arc.nasa.gov (Liz Allen-Mitchell) (12/09/88)
I've got a WREN V disk connected to my Sun 3/60 which we think we have wired correctly, but I can't seem to access. It is jumpered to SCSI address 1, which we think is target 1. I added a line to the config file to translate that to sd1, but I don't know if it's right. The relevant lines are: # Support for the SCSI-3 host adapter and the on-board SCSI controller # on several machines (e.g. 3/50). Same device support as above. # # controller si0 at vme24d16 ? csr 0x200000 priority 2 vector siintr 0x40 controller si0 at obio ? csr 0x140000 priority 2 disk sd0 at si0 drive 0 flags 0 # Modified line below for WREN V at target 1. -liz 11/7/88 #disk sd1 at si0 drive 1 flags 0 disk sd1 at si0 drive 8 flags 0 But, when I try to format it, format only finds sd0. I'm also not sure if I have the stuff in /etc/format.dat right. What I have is: disk_type = "CDC Wren V 94181-702" \ : ctlr = MD21 : fmt_time = 8 \ : cache = 0x11 : trks_zone = 15 : asect = 3 \ : ncyl = 1545 : acyl = 0 : pcyl = 1546 : nhead = 15 : nsect = 52 \ : rpm = 3597 : bpt = 30170 I think that's probably pretty close, but... Any help would be much appreciated! - Liz liz@grian.cps.altadena.ca.us ames!elroy!grian!liz