tom@sun.com (Tom Gorodecki) (12/09/88)
Hello ,
On Sun-4/280 with console on ttya a brk signal is used as an escape
character to PROM prompt . This is very inconvenient , because turning the
console off or disconnecting the RS232 wire brings the system down.
I tried to connect few pins on the RS232 cable but without success. How
can i disable the brk signal (by software or hardware )?
Thanks in advance
Tom.
Gorodecki Tom. National Semiconductor (IC)
6 Maskit st. P.O.B. 3007, Herzlia B, 46 104, Israel
UUCP: {hplabs,pyramid,sun,decwrl}!nsc!taux01!tom
domain: tom%taux01@nsc.com