ekrell@ulysses.att.com (01/28/89)
>I was just wondering if the SCSI port is internal to the machine, or if >there is a VME board needed to connect an 8mm backup unit to a Sun 4. We used a Ciprico Rimfire 3500 VME SCSI board to connect an Exabyte 8mm drive to our 4/280. Eduardo Krell AT&T Bell Laboratories, Murray Hill, NJ UUCP: {att,decvax,ucbvax}!ulysses!ekrell Internet: ekrell@ulysses.att.com
sysruth@helios.physics.utoronto.ca (Ruth Milner) (02/04/89)
Volume 7, Issue 115, message 14 of 18 Mike Begeman writes: >I have talked to TTi about a backup unit for the Sun 4/260 and have not >been able to get some questions answered. They said that their unit would >hook into the external SCSI port on the back of the Sun. I have not been >able to locate a SCSI port on the back of our Sun. I was just wondering >if the SCSI port is internal to the machine, or if there is a VME board >needed to connect an 8mm backup unit to a Sun 4. If your Sun 4 came with a cartridge tape drive, it will have a SCSI port. Otherwise you will need some kind of SCSI interface to plug it in with, whether you get it from Sun, Ciprico, TTi, etc. We plugged ours in on our Sun 4/280's SCSI OUT port, daisy-chained off the 1/4" tape, and it works fine. Ruth Milner UUCP - {uunet,pyramid}!utai!helios.physics!sysruth Systems Manager BITNET - sysruth@utorphys U. of Toronto INTERNET - sysruth@helios.physics.utoronto.ca Physics/Astronomy/CITA Computing Consortium