aries@water.waterloo.edu (Peter Bumbulis) (04/24/89)
I'm trying to format a Maxtor XT-8760E connected to a Sun Emulex MD21 controller (using the original Sun entry in /etc/format.dat for this drive/controller combination). I'm using format under SunOS 4.0.1 on a Sun 3/60. The disk formats fine (and seems to work) if I enter up to (and including) 130 defects. However, the defect list that comes with the drive has 234 defects. I can successfully enter all of these defects using format (format could not extract them from the disk); however, when I try to format the disk I get the following error: Block 3 (0/0/3), Fatal non-media error (illegal request) failed Any combination of 131 or more defects seems to fail (and any combination of 130 or less seems to succeed.) Any suggestions on what to try next would be appreciated. Thanks, Peter