longstaf@frostedflakes.llnl.gov (Thomas A. Longstaf) (07/09/89)
I have a new 3/80 that I am trying to use as a print server for a number of machines. I am using the standard transcript package with an Apple laserwriter plus. My problem is that when I connect the apple laserwriter to the Sun (port ttya), I get a number of "Offending Command" message with what looks like garbage. I can connect a terminal just fine, and can connect the same terminal to the laserwriter (and use executive mode) with no problem. But as soon as I connect the laserwriter, nothing works. This problem happens even with the transcript software un-installed. I cannot even tip out to the printer (but can tip to the terminal with no problem). The terminal is 7 bit, even parity; which should be the same as the laserwriter. Any idea what's going wrong?!? Tom Longstaff longstaf@frostedflakes.llnl.gov {lll-crg,harvard,sun,dual,rutgers,seismo,ihnp4}!lll-lcc!longstaf Lawrence Livermore Natl Lab L-542, Box 808 415-423-4416 Livermore, CA 94550