fischer@uunet.uu.net (Frank Fischer) (08/21/89)
I want to connect a Sun 3/50 running SunOS 4.0.3 to a Micom PAD for dial in and dial out on the same serial line. The kernel is configured for hardware-handshake and modem-control. There seems to be no configuration to match the handshaking between the PAD and the Sun. The only reasonable configuration for the PAD seems to be: -extended EIA controls (call option) -dedicated (channel option) ... but there is still a problem: the PAD raises DTR and RTS (would be ok) but also DCD without receiving a call. Result: -the getty thinks someone wants to log in ( DCD active) and blocks the port. -the PAD thinks someone wants to call out and doesn't accept an incoming call. Any suggestions to solve that problem ? Thanks in advance. --- Frank Fischer ISA GmbH - Informationssysteme fuer computerintegrierte Automatisierung Azenbergstr. 35, D-7000 Stuttgart 1, West-Germany, Phone: +49-711/22769-0 UUCP: ...{uunet!unido, pyramid!iaoobel}!isaak!fischer or fischer@isaak.UUCP BITNET: fischer%isaak.uucp@unido.bitnet