jmacdon@uunet.uu.net (Jeff MacDonald) (09/19/89)
Help! I am in dire need of an AT-compatible board which will allow me to add a parallel and at least two serial ports to a Sun386i. I prefer a board which will fit in the bottom (short) slot. The add-on ports must not conflict with existing parallel port at 0x378 IRQ7, serial port at 0x3F8 IRQ4, system flop at IRQ6, SCSI at IRQ8, or ethernet at IRQ13. Most boards do not provide sufficient jumperability. A Jameco board I tried did not generate interrupts reliably. Any and all help, or pointers to help, greatly appreciated. Jeff MacDonald ([decvax|ulowell]!cg-atla!jmacdon) Agfa/Compugraphic Division 200-2-9F 200 Ballardvale, Wilmington MA 01887 (508) 658-0200, extension 5406