fmbutt@cloud9.Stratus.COM (Farooq Butt) (10/12/89)
Does anyone have DIP switch settings/format.dat entries for CDC/Imprimis sabre disks hooked up to a 3/280 ?????
ekrell@hector.att.com (10/21/89)
You didn't say which exact disk model and controller you had. This info is for the 9720-1230 (the 1.2GB Sabre) with the XY 753 or the 7053 (aka SMD-4) controller: back of drive 1,2,8,9 on [left] rest off [right] top of drive starting from front to back sw1 1,2,3,4 unit id #, not necessary if front panel in place 5 off [b/8 to 8] 6 on [no write protect] 7,8,9,10 off sw2 1,2,3 on 4,5 off 6,7,8,9,10 on jumpers installed for swp1 and swpd [sweep disable]