stefan@centaur.astro.utoronto.ca (stefan mochnacki) (12/13/89)
We have a second ALM-1 to install in a Sun 3/160. It has one of the newer MultiBus-VME adapters, so I have some freedom about slot placement. However, I can't find anywhere what settings have to be made on a SECOND ALM-1. The config file has information containing: mti0 csr 0x620 mtiintr 0x88 (among other things...) mti1 csr 0x640 mtiintr 0x89 How do these differences translate to switch settings on the ALM's and adapters? I can't easily locate any useful documentation, and people with multiple ALM's around here have ALM-II's, not I's. I would be VERY grateful if someone can tell me what the differences are (the 2nd board came configured as a 1st ALM in a 3/160). Stefan W. Mochnacki INTERNET - stefan@centaur.astro.utoronto.ca Astronomy, U. of Toronto UUCP - {uunet,pyramid}!utai!helios!stefan Ph. (416) 884-9562 BITNET - mochnacki@utorphys.bitnet