dove@uunet.uu.net (Webster Dove) (02/06/90)
Last week, we installed the delta micro software for there 8mm on our 3/e server. The kernel is configured for controller se0 at vme24d16 ? csr 0x300000 priority 2 vector se_intr 0x40 tape st0 at se0 drive 32 flags 1 disk sd0 at se0 drive 0 flags 0 disk sd1 at se0 drive 1 flags 0 disk sd2 at se0 drive 8 flags 0 disk sd3 at se0 drive 9 flags 0 tape smt0 at se0 drive 40 flags 4 tape smt1 at se0 drive 48 flags 4 The machine boots, and smt0 works. However if I try to access either st0 or smt1, the kernel gets a bus error. Has anyone else had problems with the delta micro driver when configured for several drives?