km@mathcs.emory.edu (02/12/90)
Is it true that Sun only supports the old SCSI 2 boards (the ones without
disconnect) on the 4/280, and not the newer SCSI 3 boards. Is it for
4/390, 4/490? Anyone have a SCSI 2 board they want to get rid of?
Ken Mandelberg | km@mathcs.emory.edu PREFERRED
Emory University | {decvax,gatech}!emory!km UUCP
Dept of Math and CS | km@emory.bitnet NON-DOMAIN BITNET
Atlanta, GA 30322 | Phone: (404) 727-7963bauman@shell.com (Evan Bauman) (02/15/90)
>Is it true that Sun only supports the old SCSI 2 boards (the ones without >disconnect) on the 4/280, and not the newer SCSI 3 boards. Is it for >4/390, 4/490? Anyone have a SCSI 2 board they want to get rid of? Where did you hear this? It isn't true. We just installed a SCSI-3 board in our 4/280. It runs both a 1/4" cartridge tape on rst0 and an 8mm Exabyte on rst1. Both have been humming along for several weeks now. The whole package (board plus tape units) came from Artecon. Evan G. Bauman Shell Development Company - Westhollow Research Center PO Box 1380; Houston, TX 77251-1380 bauman@shell.com or for the uucp types: {sun,bcm}!shell!bauman Usual disclaimer - Oil companies do not endorse computer hardware vendors.