uucigj@swbatl.swbt.com (3531) (02/23/90)
I would like to get some information about a problem I had when I wanted to recompile the kernel on my sparcstation. For starters I have a sparc running 4.0.3c with two diskless 3/80's as clients. The sparc has a 327 meg hard drive and a separate partition for the sun 3 stuff. I want to get slip up and running on one of my serial ports and fetched the package slip-4.0. I have followed the instructions in the readme as far as making the modifications to the source code. Now I was ready to run /usr/etc/config SYSTEM_NAME (following the directions in the Sun manual). This bombed out (in the make depends) with several messages about not being able to find 5 files: ../../sun/conf.c: 370: Can't find include file ropc.h ../../sun/conf.c: 399: Can't find include file cgone.h ../../sun/conf.c: 457: Can't find include file sky.h ../../sun/conf.c: 475: Can't find include file bwone.h ../../sun4c/swapgeneric.c: 78: Can't find include file sm.h I did some investigation and found each of these files in the sun3x/OBJ directory. I made a link from them to the sun4c directory and reran the config (which then did the make depends). This time all appeared ok. I then went to the ../SYSTEM_NAME directory and ran make. This bombed out at ioconf with: cc -sparc -c -O -Dsun4c -DGENERIC -DSUN4C_60 -DVDDRV -DCRYPT -DTCPDEBUG -DIPCSHM EM -DIPCSEMAPHORE -DIPCMESSAGE -DSYSAUDIT -DSYSACCT -DLOFS -DNFSSERVER -DNFSCLIE NT -DUFS -DQUOTA -DINET -DKERNEL -I. -I.. -I../.. ioconf.c "../../sundev/mbvar.h", line 288: redeclaration of dev_info *** Error code 1 make: Fatal error: Command failed for target `ioconf.o' And it is at this point that I have stopped. The changes that I made for slip did not seem to have any bearing on the above errors but they happened. I was wondering what I was doing wrong? Do I need to change the SYSTEM_NAME file in some other way, or the Makefile.src file? The SYSTEM_NAME file was identical to the GENERIC file before I added the slip stuff (one line only in psuedo device), do I need something else in/out of that file? Any help would be appreciated.