del@thrush.mlb.semi.harris.com (Don Lewis) (05/08/90)
We are having difficulties with our CG6s. On our 4/330's and our 4/490, the graphics sometimes goes into a "split-screen" mode. Sunview icons are displayed with their left and right halves reversed. The right half (now displayed on the left) also appears to be drawn one pixel lower. It appears as if the icon was cut down the middle and the the two halves were swapped. Menus are also drawn funny. The rightmost chunk of the menu (half the width of an icon) is swapped with the left chunk (the rest of the menu). Shelltool does strange and wonderful things. The only cure appears to be to halt the machine, power it off, and then power it back on. Our 4/490 has an additional problem with the CG6. It appears that screenblank periodically causes the machine to lock up. It does not respond to L1-A, the cpu reset button is non-functional, and the cpu activity lights freeze. The only cure is to power the machine off and back on. Has anyone else out there experienced either of these problems? If so, have you found any better cures? Don "Truck" Lewis Harris Semiconductor Internet: del@mlb.semi.harris.com PO Box 883 MS 62A-028 Phone: (407) 729-5205 Melbourne, FL 32901