km@mathcs.emory.edu (06/28/90)
We just got an HP 95749 1.2GB SCSI drive, which we are testing for use on
various Suns. No documentation came with the drive, so we working from the
advertising specs for formatting info, and have left the jumpers at
default.
We were able to format the drive on a Sun 3/60 running 4.1 with no
apparent problem. Not much testing was done here, but it looked ok.
Then we tried it on a 4.1 Sun 4/280, using the si scsi board. It seems to
crash the Sun from time to time, though consistantly during the verify
phase of format. I don't know if this is a problem special to this HP
drive, or a known problem with the "si" driver on 4.1. Anyone know?
Other than this, I found the drive performance a little below my hopes.
We also have an SMD super eagle on the system running off an XY451, known
well as a slow SMD interface. The HP drive was only a little slower than
the eagle as a raw device, but as a filesystem it was about 30% slower.
Ken Mandelberg | km@mathcs.emory.edu PREFERRED
Emory University | {rutgers,gatech}!emory!km UUCP
Dept of Math and CS | km@emory.bitnet NON-DOMAIN BITNET
Atlanta, GA 30322 | Phone: (404) 727-7963