baw@terminator.cc.umich.edu (Brian Wolfe) (09/21/90)
Problem: uucp between Sun 386i 4.0.2 and AT&T 3B2 SYSV/386 that was working fails completely. Both the sun and the 3B2 call other hosts without any problems but uucp between them fails with a mesage like so... root mudss1 (8/23-16:44-24897) BAD READ (expected 'H' got FAIL) After running out of intelligent ideas, decided to use a SS1+ with SunOS 4.1 instead of the 386i. Now we see the following output if we attempt a Uutry -r host -x9 Proto started g *** TOP *** - role=1, setline - X gtwvec: dir /var/spool/uucp/mdss1 insert(C.mdss1Ne781) insert C.mdss1Ne781 at 0 return - 8 Wfile - /var/spool/uucp/mdss1/C.mdss1Ne781,Jobid = mdss1Ne781 Request: rpslmc!/etc/hosts --> mdss1!/usr/spool/uucppublic (root) wrktype - S wmesg 'S' /etc/hosts /usr/spool/uucppublic root -dc D.0 644 root send DATA, loc 1, rem 0 rmesg - 'S' recv CNTL, RR, val 1 state - [O.K.] (010) send CNTL, RR, val 1 got SY PROCESS: msg - SY SNDFILE: send DATA, loc 2, rem 1 send DATA, loc 3, rem 1 send SHORT, loc 4, rem 1 send SHORT, loc 5, rem 1 -> 165 / 0.020 secs, 8250 bytes/sec rmesg - 'C' recv CNTL, RR, val 1 state - [O.K.] (010) recv CNTL, RR, val 1 state - [O.K.] (010) pkcget: alarm 1 Alarm while looking for SYN -- request RXMIT send DATA, loc 2, rem 1 recv CNTL, RR, val 1 send DATA, loc 3, rem 1 state - [O.K.] (010) ... This continues until it eventually times out after several alarms. Below is the output from a Uutry -r host ... Login Successful: System=mdss1 msg-ROK Rmtname mdss1, Role MASTER, Ifn - 6, Loginuser - root rmesg - 'P' got Pge wmesg 'U'g Proto started g *** TOP *** - role=1, setline - X wmesg 'H' rmesg - 'H' got HN PROCESS: msg - HN HUP: *** TOP *** - role=0, setline - X rmesg - '' got S D.mdss106f4865 D.mdss106f4865 bbarut - D.mdss106f4865 0666 bbarut PROCESS: msg - S D.mdss106f4865 D.mdss106f4865 bbarut - D.mdss106f4865 0666 bbarut SNDFILE: msg - S Remote Requested: mdss1!D.mdss106f4865 --> rpslmc!D.mdss106f4865 (bbarut) SLAVE - filename: /var/spool/uucp/mdss1/D.mdss106f4865 chkpth ok Rmtname - mdss1 wmesg 'S'Y setline - R pkcget: alarm 1 pkcget: alarm 2 pkcget: alarm 3 pkcget: alarm 4 pkcget: alarm 5 pkcget: alarm 6 pkcget: alarm 7 pkcget: alarm 8 LOGFILE output: uucp mdss1 (8/24-13:40:09,338,0) SUCCEEDED (call to mdss1 ) uucp mdss1 (8/24-13:40:12,338,0) OK (startup) uucp mdss1 (8/24-13:40:14,338,0) REMOTE REQUESTED (mdss1!D.mdss106f4865 --> rpslmc!D.mdss106f4865 (bbarut)) bbarut mdss1 (8/24-13:41:57,338,1) IN SEND/SLAVE MODE (INPUT FAILURE) bbarut mdss1 (8/24-13:41:57,338,1) FAILED (conversation complete) If anyone has any idea what is going wrong here please clue me in, Thanks, Brian Wolfe RPSLMC Radiology (313)-942-5781