jlg@hocpa.att.com (Joe L Gangemi) (10/08/90)
I am looking for help in trying to use rcp across two different networks connected by a router. For Example: VAX--------network 1---------Sun 4/330----------network 2------Sun 4/330 Sys. A Sys. B 1) Sys. A has two ethernet controllers used to brdige the networks. 2) The VAX host file contains Sys. A and Sys. B 3) Sys A. host file contains the VAX and Sys. B 4) Sys B. host file contains the VAX and Sys. A 5) Network 1 is not running yellow pages but network 2 is. 6) Both networks are an ethernet link. I can use rcp to copy a file from the VAX to Sys B, and vice versa, without any problem. However, I can not use rcp to copy a file from the VAX to Sys. B or from Sys B to the VAX. I have tried "rcp fn SysA!SysB:d1" "rcp fn SysA@SysB:d1" "rcp fn SysA.SysB:d1" I would greatly appreciate any help on the subject. Thanks