flanagan@lisbon.stat.washington.edu (Jim Flanagan) (04/24/91)
I am having the following problems on a SPARC SLC with a QUANTUM207 hard drive at SCSI target 3. I am running 4.1.1b (until the machine crashes.) Apr 18 14:48:38 sverige vmunix: esp0: Spurious data in phase from target 3 Apr 18 14:48:38 sverige vmunix: Apr 18 14:48:38 sverige vmunix: esp0: Target 3 now Synchronous at 4.0 mb/s max And pr 20 01:51:13 sverige vmunix: esp0: failed reselection Apr 20 01:51:13 sverige vmunix: State=RESEL Last State=FREE Apr 20 01:51:13 sverige vmunix: Latched stat=0x17<XZERO,MSG,CD,IO> intr= 0xc<FCMP,RESEL> fifo 0x1 Apr 20 01:51:13 sverige vmunix: last msg out: <unknown msg 0xff>; last m sg in: DISCONNECT Apr 20 01:51:13 sverige vmunix: DMA csr=0x80000000 Apr 20 01:51:13 sverige vmunix: addr=ff06e000 last=ff06c000 last_count=2 000 Apr 20 01:51:13 sverige vmunix: sd0: SCSI transport failed: reason 'reset': r etrying command Apr 20 01:51:13 sverige vmunix: esp0: Target 3 now Synchronous at 4.0 mb/s max transmit rate Any clues? Looks like the SCSI controller is bad? What do I send back, the SLC or the external disk pack? Jim Flanagan #ifdef OFFENSIVE flanagan@stat.washington.edu static char disclaimer[] = NULL; System Programmer #endif UofW Statistics main(){while(fork());} /* terminate account */