amir@taux01.nsc.com (04/24/91)
[I'm pretty sure I have not posted this before, but if I did, I apologize - I have not seen it in the sun-spots -- AJK]. Subject: Need a printcap entry for NewGen TurboPS/360 Postscript printer - I have a NewGen TurboPS/360 Postscript printer connected to a Sun IPC running SunOS 4.1 via serial port A, 19200 bps. - Printer works OK in PostScript mode. - It can do LaserJet II emulation but I can't get it to work. Sending an LJ job to it results in constant stream of data sent from the spooling machine to the printer, the BUSY light on the printer is constantly on, but nothing comes out. A long sequence of lpc commands is required to kill this mess. - Any hints? Amir J. Katz, System Manager Internet: amir%pilat.UUCP@taux01.nsc.com OR amir@taux01.nsc.com UUCP: {decwrl,uunet,...}!nsc!taux01!amir Phone: +972 52-570713 Fax: +972 52-570719 Snail-mail: Amir J. Katz, Silvaco Israel Ltd. 19 Maskit St., Herzelia, Israel 46733