kcables@relay.nswc.navy.mil (05/10/91)
Please forgive me if I'm posting this to the wrong newsgroup. This is my first post. I have a few questions about StP (Software through Pictures). I have a 386i, SunOS version 4.0.2, and the 4.0 Sunview version of StP. First question: in the DFE window, how can you renumber the process nodes? I've had situations where I create several processes, then I want to delete some of them and renumber the rest. The counter increments as if all the ones that I have inserted exist. You can clear, but that gets rid of everything. Second question: My User Manual says that the ToolInfo variable "unique_flows" defaults to 1, which is supposed to prevent repetition of input and output flows in process specs. The ToolInfo file has it defaulted to 1, but when I created the example in the DFE User Manual and created the process spec, the duplicate flows were listed. I changed it to "uniqu_flows 0", and it did the same thing. Any suggestions or comments? Thanks in advance. Kathryn Cables kcables@relay.nswc.navy.mil
tep%tots.UUCP@ucsd.edu (Tom Perrine) (06/05/91)
In article <2806@brchh104.bnr.ca> kcables@relay.nswc.navy.mil writes: >X-Sun-Spots-Digest: Volume 10, Issue 73, message 9 >X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu > >Please forgive me if I'm posting this to the wrong newsgroup. This is my >first post. I have a few questions about StP (Software through Pictures). >I have a 386i, SunOS version 4.0.2, and the 4.0 Sunview version of StP. > ... questions deleted... > Kathryn Cables > kcables@relay.nswc.navy.mil Since there may be other StP users out there... There is a small mailing list for IDE/StP users, contact ron@ide.com for more information. Tom Perrine (tep) |Internet: tep@tots.Logicon.COM Logicon - T&TSD | UUCP: sun!suntan!tots!tep P.O. Box 85158 |GENIE: T.PERRINE San Diego CA 92138 |Voice: +1 619 455 1330 "Harried: with preschoolers" | FAX: +1 619 552 0729