NETS@eni.prime.COM (01/28/88)
) on the "mainframe"; with a 60hz (presumably line) clock on the micro. If you are connected over TELENET, the delay will typically by much less than 1 second. At the moment, I am logged in to a PRIME system from a TELENET PAD, and I have apparently-real-time command execution. I.e. less than 200 milliseconds. I suggest that the micro request time from the host mainframe, and then subtract (about) 0.4 seconds. This will certainly give results at least as accurate as the (postulated) 1 second mainframe clock. Robert Ullmann Postmaster@en-c06.Prime.com (Ariel@en-c06.Prime.com)