nomdenet%rand-unix@tp3.UUCP (11/16/83)
Shortly we'll be getting a VAX-11/730 with a TU80 streaming tape drive and four RL02 disk drives (I had little say about the configuration), and I have some questions, but no hardware manuals yet. - Will all four RL02s be controlled by the Integrated Disk Controller, or only the first two? If the IDC takes care only of two RL02s, what takes care of the second pair? I see reference in the DEC configuration/ordering manual to an RL211-AK controller & drive; is that controller independent of the IDC, or is it an extension, so to speak? - "hp" is UNIX's generic name for disks of the RM and RP persuasion; what is the generic name for RL02s? If the second pair of RL02s above is controlled by the RL211, what is its generic name? Does the second pair have a different name than the IDC-controlled pair? - Does anybody have a driver for the TU80 tape drive? Is it suffi- ciently like something else that that something else's driver may be bent into shape? If so, what's it like? - There is the problem of booting from the UNIX BSD distribution tape. If the TU80 is like something else, I can cobble up a boot pro- gram to key in from the 730's console. If it's a unique beast, does anybody have such a boot program? I greatly need to get in touch with anybody who has worked with 730s in general and the above hardware in particular. Since I doubt this is of sufficient interest to the group as a whole, please send me mail directly -- though this may be a problem because my usenet access is through the ARPA network. I would appreciate it if you could call me weekdays between 11 a.m. and 5:30 p.m. PST. I'll be grateful for any & all help. Once I become familiar with 730s, I'll gladly share with the community. TIA, A. R. White The Rand Corporation 1700 Main Street Santa Monica, Ca. (213) 393-0411, x7997 (messages at x444) tp3!nomdenet @ RAND-UNIX