[comp.dcom.telecom] SMDR For 1A2 or Single Line

JAJZ801@calstate.bitnet (10/08/90)

 
   Does anyone know of equipment that could be hooked to either a
single phone or one line of a 1A2 system that could perform some of
the functions of SMDR, for both outgoing and incoming calls but at
least time recording for incoming. Also, the phones are currently
pulse dial ! (Don't bother making suggestions about replacing the
system or the phones, I could figure that out myself but is not an
option right now.) I imagine some of this could be done with a modem
and PC so such software and hardware suggestions are OK but would
prefer, if possible, a less expensive device solution.
 

Jeff Sicherman
 

dave@westmark.westmark.com (Dave Levenson) (10/08/90)

In article <13140@accuvax.nwu.edu>, JAJZ801@calstate.bitnet writes:

>    Does anyone know of equipment that could be hooked to either a
> single phone or one line of a 1A2 system that could perform some of
> the functions of SMDR...

I remember seeing something like that available over-the-counter at
Radio Shack.  The unit resembles a small printing calculator with a
modular jack.  You use the keyboard for setting date and time, and for
administering its options.  It prints a one- or two-inch paper tape of
call-detail.  There may also be some on-demand summary report
available.


Dave Levenson			Internet: dave@westmark.com
Westmark, Inc.			UUCP: {uunet | rutgers | att}!westmark!dave
Warren, NJ, USA			AT&T Mail: !westmark!dave
[The Man in the Mooney]		Voice: 908 647 0900  Fax: 908 647 6857

BRUCE@ccavax.camb.com (Barton F. Bruce) (10/10/90)

In article <13140@accuvax.nwu.edu>, JAJZ801@calstate.bitnet writes:

> ...single phone or one line of a 1A2 system ... SMDR...

It may not do all you want, and I cringe at the thought of
recommending this particular source, but you might look at Radio
Shack's gadget.