maureen@scirtp.UUCP (Maureen Chew) (09/18/87)
We have a 386 V.3 machine running Ethernet from Micom/Interlan. RFS and Ethernet are running fine. I've been trying to setup uucico over the network and haven't had much success. It appears that the bind command is failing. Sysfiles tells uucico to go to Systems.cico, Devices.cico and Dialers.cico Assume that the remote machine is, machineb, and the master uucico side is, machinea. Systems.cico: machineb Any ListenCico - \x000204017800000d Devices.cico: ListenCico,eg it - - TLIS \D listencico Dialers.cico: listencico"""" NLPS:000:001:101\N\c Uucico is registered with the network listener on machineb with this command: nlsadmin -a 101 -c "/usr/lib/uucp/uucico -r 0 -i TLIS -u nuucp \ -y "uucico servier with NO login checking" it nlsadmin -x on both sides show that the "it" network is active. Here are the results from uucico -r1 -smachineb -x9 mchFind called (machineb) list (rmail) num = 1 name (machineb) not found; return FAIL list (rmail) num = 1 name (OTHER) not found; return FAIL _Request (FALSE), _Switch (TRUE), _CallBack (FALSE), _MyName (), _Commands rmail chdir(/usr/spool/uucp/machineb) conn(machineb) Device Type ListenCico wanted ProtoStr = eg Internal caller type TLIS tlicall: bound to t_connect to addr "\x000204017800000d" t_connect: An event requires attention state is T_IDLE reason is T_DISCONNECT disconnect reason #175 ProtoStr = egeg Internal caller type TLIS tlicall: bound to t_connect to addr "\x000204017800000d" t_connect: An event requires attention state is T_IDLE reason is T_DISCONNECT disconnect reason #175 getto ret -1 Device Type ListenCico wanted ProtoStr = eg Internal caller type TLIS tlicall: bound to t_connect to addr "120.0.0.13" t_connect: An event requires attention state is T_IDLE reason is T_DISCONNECT disconnect reason #175 ProtoStr = egeg Internal caller type TLIS tlicall: bound to t_connect to addr "120.0.0.13" t_connect: An event requires attention state is T_IDLE reason is T_DISCONNECT disconnect reason #175 getto ret -1 Call Failed: NO DEVICES AVAILABLE exit code 101 Conversation Complete: Status FAILED TM_cnt: 0