[comp.sys.dec] What's in an H9544-CF

d38j@vax5.cit.cornell.edu (07/17/90)

	We recently added a spare RA-81 to the top bay of our Q5
Microvax II - this is the "fat" H9642-J(A/B) cabinet with the front
left to right rear ventilation. The RA-81 is just long enough that
the top bracket/panel in the rear - that provides the top hinge for
the rear door - doesn't fit anymore. It's semi OK, but I'd like to
get it all buttoned back up. In an older system catalog I found
listed an H9544-CF, a 'Top trim kit', which shows up on DEC's lists
as an 'H9642/RA-81/82 Trim kit'. Note that it is different listing
than an RA-60 Trim kit. Local field service, and DEC tech assistance
are either only familiar with the RA-60 (which is shorter) mounting,
or said "it's usually only a couple of pieces of trim", or "I'll have
someone get back to you." They either didn't, or I was down 3 floors
changing the oil in an IBM when they called....
	Does anyone have any direct experience with this cabinet/config?
Does the trim kit include a new door mounting bracket, or is there
some adapter that I haven't found? What do I need to put the rear door
back on the uVax? Thanks in advance.
                                             Dave

David W. Juers                                D38J@VAX5.CIT.CORNELL.EDU
SCAS, Cornell University                      D38J@CRNLVAX5.BITNET
1113 Bradfield Hall                           607-255-1753
Ithaca,  NY  14853