[comp.sys.dec] Aviv CC-900 SDZV Board-Help!

durham@w2xo.PGH.PA.US (Jim Durham) (11/08/90)

I have been trying without avail to get a manual for an Aviv
CC-900 serial board. Many calls to Aviv haven't produced a
manual yet, and I'm getting desperate!

Does anyone know anything about this board? It is an 8 port
serial card that is supposed to be a DZV work-alike. It
*does* work with the DZ driver, but apparently overruns at
anything over 600 baud. It is stamped with "SDZV" as well
as 'CC-900' .

The switches on the card are the same as a DZV (csr and
interrupt vector), but there are also some extra switches
that the DZV does not have marked 'm2', 't1' and a
3 pole dip switch marked 'p1 p2 p3' .

Any help *greatly* appreciated...

Thanks,

Jim Durham   (durham@w2xo.pgh.pa.us | jcd@cs.pitt.edu)
-- 
Jim Durham
internet:  durham@w2xo.pgh.pa.us       ham packet radio:
	   jcd@cs.pitt.edu		w2xo@w2xo.#wpa.pa.usa.na