da@cs.brown.edu (David Ascher) (04/09/91)
Setup: DecStation 5000/200 I can't seem to get the postscript previewer to work on any postscript file whatsoever. I consistently get: X Toolkit Warning: Idb__BM_GetRecord: Get block failed - DRMFailure X Error of failed request: BadAlloc (insufficient resources for operation) Major opcode of failed request: 53 (X_CreatePixmap) Serial number of failed request: 1128 Current serial number in output stream: 1129 Any ideas? --david ascher -- == David Ascher -- Brown University, Providence RI 02912 == Internet: dascher@brownvm.Brown.EDU (Internet) == UUCP: uunet!brunix!da == Bitnet: dascher@brownvm
klee@wsl.dec.com (Ken Lee) (04/10/91)
In article <DA.91Apr9120556@igor.cs.brown.edu>, da@cs.brown.edu (David Ascher) writes: |> Setup: DecStation 5000/200 |> |> I can't seem to get the postscript previewer to work on any postscript |> file whatsoever. I consistently get: |> |> X Toolkit Warning: Idb__BM_GetRecord: Get block failed - DRMFailure |> X Error of failed request: BadAlloc (insufficient resources for operation) |> Major opcode of failed request: 53 (X_CreatePixmap) The release notes say you should set "watch progress" to work around this. -- Ken Lee DEC Western Software Laboratory, Palo Alto, Calif. Internet: klee@wsl.dec.com uucp: uunet!decwrl!klee
frank@croton.nyo.dec.com (Frank Wortner) (04/10/91)
If the DECstation 5000/200 you refer to is a PX model, try selecting the Watch Progress option from the Options menu *before* you open any file for viewing. Frank