david@lrc.edu (06/21/91)
I have just had a LA12 brought to me and I'm not sure how I can change the setup. This is what I get when I go through setup. COMMUNICATIONS Auto-Ansbk=no Buffer=1024 Comm port =DCM Disc-HDX=none Echo-local=yes Fault=xoff(DC3) G-HDX start mode=Rcv H-Hi Speed(bps)=1200 L-Lo Speed(bps)=300 M-line prot=FDX-full ctrl O-Rcv error ovride=yes Parity=7/S or 8/N Q-SRTS polarity=Lo Restraint=xon/xof S-Speed select=Hi Turn char=none U-power up=line + echo V-Frequency=Bell 103 KEYBOARD Auto-linefeed=no Break=yes C-Keyclick=yes Keypad=normal Language=USA Repeat=yes PRINTER A-G0 char set=USA B-G1 char set=USA C-G2 char set=USA D-G3 char set=USA End-of-line=wrap Form Length=264 G-Print ctrl chars=no Horiz pitch (cpi)=10 NewLine char.=none Print Force=hi Vert pitch (lpi)=6 VERSION V=V1.3 Thanks for any help. --------------------------------------------------------------------------- David J. Link UUCP: lrc!david@mcnc.org Lenoir-Rhyne College or david@lrc.edu Hickory, NC 28603 (USA) I make no claims, but God does.