john@trigraph.uucp (John Chew) (01/24/90)
Here's the January 1990 edition of the Inter-Network Mail Guide.
As it says, I'm always looking for corrections or additions at
<poslfit@gpu.UTCS.UToronto.CA>.
John
----- CUT HERE and watch out for the .signature at the end -----
# Inter-Network Mail Guide
# $Header: netmail,v 1.7 90/01/23 11:04:27 john Exp $
#
# This file documents methods of sending mail from one network to another.
# It is maintained by John J. Chew <poslfit@gpu.UTCS.UToronto.CA>, and is
# posted monthly to comp.mail.misc and news.newusers.questions. Please
# send any corrections or additions to the above address.
#
# Each entry in this file describes how to get from one network to
# another. To keep this file at a reasonable size, methods that can
# be generated by transitivity (A->B and B->C gives A->B->C) are omitted.
# Entries are sorted first by source network and then by destination
# network, and a typical entry looks like:
#
# #F mynet
# #T yournet
# #R youraddress
# #C contact address if any
# #I send to "youraddress@thegateway"
#
# #F (from) and #T (to) lines specify source and destination networks.
# These are currently one of:
#
# applelink Apple Computer, Inc.'s in-house network
# bitnet international academic network
# bix Byte Information eXchange: Byte magazine's commercial BBS
# bmug Berkeley Macintosh Users Group
# compuserve commercial time-sharing service
# connect Connect Professional Information Network (commercial)
# fax Facsimile document transmission
# fidonet PC-based BBS network
# geonet commercial information network
# internet the Internet
# mci MCI's commercial electronic mail service
# mfenet Magnetic Fusion Energy Network
# nasamail NASA internal electronic mail
# sinet Schlumberger Information NETwork
# span Space Physics Analysis Network
# telemail Telenet's commercial mail service
#
# #R (recipient) gives an example of an address on the destination network,
# to make it clear in subsequent lines what text requires subsitution.
#
# #C (contact) gives an address for inquiries concerning the gateway,
# expressed as an address reachable from the source (#F) network.
#
# #I (instructions) lines, of which there may be several, give verbal
# instructions to a user of the source network to let them send mail
# to a user on the destination network. Text that needs to be typed
# will appear in double quotes, with C-style escapes if necessary.
#F applelink
#T bitnet
#R user@site
#I send to "user@site.bitnet@dasnet#"
#F applelink
#T internet
#R user@site.domain
#I send to "user@site.domain@dasnet#"
#F bitnet
#T applelink
#R user
#I send to "XB.DAS@STANFORD.BITNET"
#I set subject to "user@APPLELINK"
#F compuserve
#T fax
#R +1 415 555 1212
#I send to "FAX 14155551212" (only to U.S.A.)
#F compuserve
#T internet
#R user@site.domain
#I send to ">INTERNET:user@site.domain"
#F compuserve
#T mci
#R 123-4567
#I send to ">MCIMAIL:123-4567"
#F connect
#T internet
#R user@site.domain
#I send to CONNECT id "DASNET"
#I first line of message: "\"user@site.domain\"@DASNET"
#F fidonet
#T internet
#R user@site.domain
#I send to "uucp" at nearest gateway site
#I first line of message: "To: user@site.domain"
#F internet
#T applelink
#R user
#I send to "user@applelink.apple.com"
#F internet
#T bitnet
#R user@site
#I send to "user%site.bitnet@gateway" where "gateway" is a gateway host that
#I is on both the internet and bitnet. Some examples of gateways are:
#I cunyvm.cuny.edu gpu.utcs.toronto.edu jade.berkeley.edu mitvma.mit.edu.
#I Check first to see what local policies on inter-network forwarding are.
#F internet
#T bix
#R user
#I send to "user@dcibix.das.net"
#F internet
#T bmug
#R John Smith
#I send to "John.Smith@bmug.fidonet.org"
#F internet
#T compuserve
#R 7xxxx,yyy
#I send to "7xxxx.yyy@compuserve.com"
#F internet
#T connect
#R NAME
#I send to "NAME@dcjcon.das.net"
#F internet
#T fidonet
#R john smith at 1:2/3
#I send to "john.smith@f3.n2.z1.fidonet.org"
#F internet
#T geonet
#R user@host
#I send to "user@host.das.net"
#F internet
#T mci
#R John Smith (123-4567)
#I send to "1234567@mcimail.com"
#I or send to "JSMITH@mcimail.com" if "JSMITH" is unique
#I or send to "John_Smith@mcimail.com" if "John Smith" is unique - note the
#I underscore!
#I or send to "John_Smith/1234567@mcimail.com" if "John Smith" is NOT unique
#F internet
#T mfenet
#R user@mfenode
#I send to "user%mfenode.mfenet@nmfecc.arpa"
#F internet
#T nasamail
#R user
#C <postmaster@ames.arc.nasa.gov>
#I send to "user@nasamail.nasa.gov"
#F internet
#T sinet
#R node::user or node1::node::user
#I send to "user@node.SINet.SLB.COM" or "user%node@node1.SINet.SLB.COM"
#F internet
#T span
#R user@host
#C <NETMGR@nssdca.gsfc.nasa.gov>
#I send to "user@host.span.NASA.gov"
#I or to "user%host.span@ames.arc.nasa.gov"
#F internet
#T telemail
#R [user/organization]system/country
#C <Intermail-request@intermail.isi.edu>
#I send to "\"[user/organization]system/country%TELEMAIL\"@intermail.isi.edu"
#F mci
#T internet
#R John Smith <user@site.domain>
#I at the "To:" prompt type "John Smith (EMS)"
#I at the "EMS:" prompt type "internet"
#I at the "Mbx:" prompt type "user@site.domain"
#F nasa
#T internet
#R user@site.domain
#I at the "To:" prompt type "POSTMAN"
#I at the "Subject:" prompt enter the subject of your message
#I at the "Text:" prompt, i.e. as the first line of your message,
#I enter "To: user@site.domain"
#F sinet
#T internet
#R user@site.domain
#I send to "M_MAILNOW::M_INTERNET::\"user@site.domain\""
#I or "M_MAILNOW::M_INTERNET::site.domain::user"
#F span
#T internet
#R user@site.domain
#C NETMGR@NSSDCA
#I send to "AMES::\"user@host.domain\""
#F telemail
#T internet
#R user@site.domain
#C <Intermail-Request@intermail.isi.edu>
#I send to [INTERMAIL/USCISI]TELEMAIL/USA
#I first line of message: "Forward: ARPA"
#I second line of message: "To: user@site.domain"
----- end -----
--
john j. chew, iii phone: +1 416 425 3818 AppleLink: CDA0329
trigraph, inc., toronto, canada {uunet!utai!utcsri,utgpu,utzoo}!trigraph!john
dept. of math., u. of toronto poslfit@{utorgpu.bitnet,gpu.utcs.utoronto.ca}