jima@idayton.field.intel.com (Jim Abernathy) (04/18/91)
I could not post a reply to the original article or email the author, but here is the answer: chuah@cosc.canterbury.ac.nz (Pencangkul Matahari) writes: >Readers, > Is there anyone out there who has experience in writting a TCP/IP >communications device driver for a Multibus II (TM) system running iRMX? >I am working on a project that involves writing a communications driver >that can communicate over ethernet using TCP/IP. I would like to >hear from anyone who has experience in this field. Please email me. >I will forward a summary if I get enough conclusive replies. > Thank you. There are at least two versions of TCP/IP for iRMX on MBII. One from the Intel SE organization and one from a third party, Fusion by Network Research. See the 1991 MBII product directory published by the Multibus Manufacturers Group, available from your local Intel office. ------------------------------------------------------------------------- Jim Abernathy | INTERNET : jima@idayton.field.intel.com Regional Application Specialist| UUNET : intelhf!idayton!jima Intel Corporation, Suite 220 | CompuServe: >INTEL:ABERNATHY.J 3401 Park Center Drive | Phone : (513) 890-5350 Dayton, OH 45414 | FAX : (513) 890-8658 ------------------------------------------------------------------------- -- ------------------------------------------------------------------------- Jim Abernathy | INTERNET : jima@idayton.field.intel.com Regional Application Specialist| UUNET : intelhf!idayton!jima Intel Corporation, Suite 220 | CompuServe: >INTEL:ABERNATHY.J