dave@astra.necisa.oz (Dave Horsfall) (09/10/87)
H'lo all... (Usual disclaimer about sorry if this was already asked etc)
There appears to be a slight problem with SCO Xenix 2.2, on an AT clone.
Basically, it appears to be ignoring the delay specification in /etc/termcap,
and manifests itself as cursor positioning commands screwing up when talking
to VT220's etc on the COM ports.
Any ideas? Bug fixes etc?
--
Dave Horsfall (VK2KFU) ACSnet/CSNET: dave@astra.necisa.oz
NEC Information Systems Aust. ARPA: dave%astra.necisa.oz@uunet.uu.net
3rd Floor, 99 Nicholson St JANET: astra.necisa.oz!dave@ukc
St. Leonards NSW 2064 AUSTRALIA UUCP: {enea,hplabs,mcvax,uunet,ukc}!\
TEL: +61 2 438-3544 FAX: 439-7036 munnari!astra.necisa.oz!dave