sl@van-bc.UUCP (pri=-10 Stuart Lynne) (12/23/88)
I've just discovered that you can run the Bell Tech XTC cartridge
drive with the standard Xenix drivers. Neat and faster!
In /usr/sys/io/ctconf.asm you need to set:
CTCNTRLR EQU 3
CTDMACH EQU 1
CTINT EQU 5
CTBASE EQU 0300H
and rebuild your kernel.
Then readdress the drive from #3 to #1. I have a Wangtec which has a four
way jumper selection area, with the jumper on the third pair. Simply had to
move it to the first pair.
The SCO driver seems to be a lot nicer than the Bell Tech one, although the
one I have from them is a year old. They might have a better one now.
--
Stuart.Lynne@wimsey.bc.ca {ubc-cs,uunet}!van-bc!sl Vancouver,BC,604-937-7532