itkin@mrspoc.UUCP (Steven M. List) (02/14/89)
I've recently decided to upgrade our Wyse pc386 (it came with a dinky 40MB disk). I contacted a Wyse distributor (Wyle Labs) and they recommended and sold me an Adaptec ACB-2322A ESDI controller and a Micropolis 1558 382MB ESDI disk. Great! But there was no manual with the disk and I've never installed a setup like this before. Looks simple, right? I've connected everything as is, using all the defaults. Cables in the right places, ground connectors connected, ready to go. I try to boot the SETUP disk so I can change the configuration and get in to twiddle the CMOS and the system tells me that it can't find a BOOTABLE DEVICE! So now what? I've got calls in to both Wyle and Wyse. They are DEFINITELY taking their time in responding. Meanwhile the machine is so much junk iron! I'm guessing that I need to change some jumpers or something, but have NO idea what to pick. I don't want to start to messing with stuff without some knowledge of what I'm doing for all the obvious reasons. Can someone offer some help? I'm tired of calling Wyle and Wyse and REALLY want to be able to use this machine. -- : Steven List @ Transact Software, Inc. :^>~ : Chairman, Unify User Group of Northern California : {apple,coherent,limbo,mips,pyramid,ubvax}!mrspoc!itkin : Voice: (415) 961-6112