patg@impch.UUCP (Patrick Guelat) (03/28/89)
In SCO 2.2.1-times we used to have a dialin gettydefs cycle which started up getty at 2400 bps, going down to 1200 and finally to 300. Getty switched correctly to the next entry if the user typed a cr. We did the same with SCO 2.2.3, but getty doesn't seem to recognize framing errors anymore when the user types a cr. It switches correctly if you send a break, but that's not a solution.. I could use my own getty, but this one doesn't seem to work with the new dialin/out - concept of hdb-uucp & friends. (BTW, how does this one work ?!?!, no longer this SIGUSR1-into-background-kick ??) Any help would be appreciated Patrick -- \\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\// // Patrick Guelat, ImproWare Switzerland \ SMART: patg@impch.uucp \\ \\ SUB-NET: ..!altger!impch!{patg,boxdiger} \________ Wasting time is an // // EUNET : ..!cernvax!impch!{patg,boxdiger} \ important time of\\ \\ OTHER : ..!uunet!acad!acadch!impch!{patg,boxdiger} \ living. // //\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\