usenet@cps3xx.UUCP (Usenet file owner) (06/06/89)
OS: SCO Xenix 2.3 Is it possible to set the baud rate on a serial line without having the line enabled and without doing an open and ioctl? Something like 'stty 4800 </dev/tty2a' seems to only work if the line is enabled. I need to have the line disabled and be able to do things like 'cat >/dev/tty2a' at the proper baud rate. When the line is disabled, it stays at 9600 baud. Is there someplace to set a default? There seemsed to be nothing appropriate in /etc/defaults. Advance thanx, John H. Lawitzke UUCP: Work: ...rutgers!mailrus!frith!dale1!jhl Dale Computer Corp., R&D ...uunet!frith!dale1!jhl 2367 Science Parkway Home: ...uunet!frith!ipecac!jhl Okemos, MI, 48864 Internet: jhl@frith.egr.msu.edu