hadji@dasys1.UUCP (Toby A David) (10/10/89)
Hi.. I hope I am not becoming a pain with my various questions.. Since I
asked for opinions on my 2.2.3 install problems, I have also decided to
upgrade to a 20mhz 386 clone. Since I'd like to interchange hardware between the
286 and 386, I decided to go for a 3085 71 meg Miniscribe with a WD1006.
Does anybody know of any existing problems with 286 or 386 Xenix/Unix and the
>1024 Cyl of the 3085, previous postings on the subject seemed to be concerned
with ESDI and not MFM.
Having been bitten recently I would very much appreciate any reports on the
subject. Thanks in advance..
Toby
--
Toby A David
Big Electric Cat Public UNIX
..!cmcl2!{ccnysci,cucard,hombre}!dasys1!hadji
akcs.larry@nstar.UUCP (Larry Snyder) (10/11/89)
>upgrade to a 20mhz 386 clone. Since I'd like to interchange hardware between >the >286 and 386, I decided to go for a 3085 71 meg Miniscribe with a WD1006. >Does anybody know of any existing problems with 286 or 386 Xenix/Unix and the >>1024 Cyl of the 3085, previous postings on the subject seemed to be concerned I am running a Micropolis 1335 and Miniscribe 3085 RLL using an Adaptec 2372 (which will be replaced by a WD1006-SVR2) and haven't had any problems on my machine (25 mhz '386 w 4 megs). Both drives are 1024 * 8 * 26.
klaus@mt1hh.UUCP (Klaus Kleemann) (10/13/89)
From article <10895@dasys1.UUCP>, by hadji@dasys1.UUCP (Toby A David): > ... Since I'd like to interchange hardware between the > 286 and 386, I decided to go for a 3085 71 meg Miniscribe with a WD1006. > Does anybody know of any existing problems with 286 or 386 Xenix/Unix and the > >1024 Cyl of the 3085, previous postings on the subject seemed to be concerned > with ESDI and not MFM. ... > Toby Hi, few days ago I installed exactly that combination here under XENIX-286 2.2.1, it's working fine. The disks were formatted with speedstore, installed as type 19 (1024 cyl. 7 heads) and during the XENIX-installation the maxtrack set to 1169. Klaus -- Klaus Kleemann ][ ampr : db2hk@db0hb TU-Hamburg-Harburg, Meerestechnik I ][ privat: klaus@ccsq.UUCP Elbchaussee 35, 2000 Hamburg 50 ][ dienst: klaus@mt1hh.UUCP Tel. +49 40 3807-2914 ][ dnet : mt1-kkl@tuhhco.UUCP