mitch@fedeva.UUCP (Mitch Wood) (12/05/89)
Well, I have been trying to load in SCO TCP/IP for a month now. And with their assistance (er.. ugh.. non-assistance). I got the software loaded and it comes up ok and says that it is loaded, and inet & such are running, but when I try to telnet to another machine on the ethernet, it says.... Trying...... and never returns.. 1. I have /etc/hosts set up properly 2. I did load SCO STREAMS runtime 3. I did check the Western DIGITal card for correct IRQ and such. All ok... Now.. what did I forget..? Help!!! TCP'OED in MEMPHIS -- +---------------------------------------------------+----------------------+ ! Mitch Wood @ FEDERAL EXPRESS Memphis, TN # "Ok you guys, quit ! ![..!hplabs!csun,..!mit-eddie!premise]!fedeva!mitch # clowning around and..! +---------------------------------------------------+----------------------+
davidsen@crdos1.crd.ge.COM (Wm E Davidsen Jr) (12/07/89)
Thanks to check (forgive if you have already): 1. /etc/hosts 2. subnet mask 3. your net address We're running on a number of machines here using both enet and SLIP, and everything looks good. We have one machine which won't accept rlogin or deliver mail, but I assume that's a setup problem since the others work. -- bill davidsen (davidsen@crdos1.crd.GE.COM -or- uunet!crdgw1!crdos1!davidsen) "The world is filled with fools. They blindly follow their so-called 'reason' in the face of the church and common sense. Any fool can see that the world is flat!" - anon