tpf@jdyx.UUCP (Tom Friedel) (12/24/89)
Is there anything special I need to know to add a Logitech C9
Bus Mouse to Xenix 2.3.2 ?
IRQ 2, 3 or 5 Base Address 23ch works under Unix
I get invalid device or address with usemouse
or open("/dev/mouse/bus0", "r" ) ;
mkdev mouse seemed real straightforward.
I am at a loss.
Tom
--
Tom Friedel (404) 320-7624 tpf@jdyx.UUCP CIS: 71131,3234
also: tpf@jdyx.atlanta.ga.us ...gatech!emory!jdyx!tpf
Unix BBS: (404) 325-1719 <= 2400 ; (404) 321-5020 >= 2400
"Live simply, so that others may simply live."tpf@jdyx.UUCP (Tom Friedel) (12/26/89)
>Is there anything special I need to know to add a Logitech C9 >Bus Mouse to Xenix 2.3.2 ? Turns out if I boot DOS, run mouse.com, and press Ctl-Alt-Del then Xenix will 'see' the mouse at 23ch. Otherwise mouse is not listed at boot time. Maybe it si something peculiar about my system. Another observation is that the MOUSEIOCREAD ioctl unly appears to function on /dev/mouse/vpix0, not /dev/mouse/bus0. This has been observed on two systems now. Lastly, does anyone have C code to interface with a serial mouse through a serial port? (big request, but it is Christmas) tom jdyx!tpf JDyx Enterprises BBS: (404) 325-1719 <= 2400 ; (404) 321-5020 >= 2400