steve@vlink01.UUCP (1770 MCI) (01/07/90)
I hope someone can help me. I am running Xenix 386. I am calling into a local number which has a microm data switch. I was given the L.sys setup as follows: xxxxxx Any ACE 2400 xxx-xxxx ""\r\c Name? xxxxx nected \c GO \d\r\d\r\d\r in:--in:--in: xxxxx word: xxxxx I cannot make contact. I have talked with the administrator and he told me that everyone is running unix not xenix and couldn't help me. I found out if I call into the switch (using a comm package) using 8 bit no parity and get to the nected part and change to 7 bit and even parity it works. I don't know how to change my system to accomodate this. I don't have any problems with any other machine. They have a number 9.6 Telebit line which I can use, but I don't want to take valuable time away from the 9.6 people running at 2400 baud. The L.sys for the 9.6 line is as follows: xxxxxx Any ACU 19200 xxxxxx in:--in--in: xxxx word: xxxx If _any one can help me_ I would appreciate it very very much. Thanks in advance. -- |UUCP Mail : osu-cis!vlink01!steve |Vlink | |MCI Mail : uucp!mcimail.com!368-5882 |Steven E. Frazier | |ATT Mail : attmail!vlink01!steve |1828 Darrow Drive | |Voice Mail: 614-755-3772 |Powell, Ohio 43065 |