mark.levy@canremote.uucp (MARK LEVY) (02/06/90)
mP>From: mike@bbm.UUCP (Mike Doucette) mP>Subj: using mouse with sSCO Xenix mP>Orga: BBM Bureau of Measurement, Toronto mP> Does anyone out there in netland know how to get a mP> mouse to work with xenix. mP> I have an ATI VGA Wondercard that has a bus mouse port mP> that emulates a microsoft bus mouse. I have installed it mP> in dos and it works, but when I try to use it with mP> the usemouse command I get the error message: mP> "d_open: can't attatch /dev/mouse/bus0 to event que, errno 22" mP> "ev_open: error attatching device" mP> "usemose: cannot open event que(22)" mP> On boot up my system shows a mouse installed. I have used mP> IRQ 2 and have configured it to memory location 023cH as mP> per the manufactures specs. Don't use IRQ2 on an AT style computer! IRQ2 is reserved for cascading the higher IRQs available on ATs. Mark --- ~ DeLuxe 1.11a18 #3019 ~ QNet 2.04a:NorthAmeriNet: Sound Advice BBS ~ Gladstone ~ MO