emuleomo@paul.rutgers.edu (Emuleomo) (03/20/90)
If you had two 386 machines loaded with SCO XENIX 3.2, how would you set them up so that you can do UUCP between these 2 machines WITHOUT USING A MODEM! Is this possible? or will I have to use a Null modem? Can I do cu from machine A to machine B? E-mail will be appreciated! Thanx --Emuleomo O.O. (emuleomo@yes.rutgers.edu) -- ** The ONLY thing we learn from history is that we don't learn from history!
neal@mnopltd.UUCP (03/21/90)
->If you had two 386 machines loaded with SCO XENIX 3.2, how would you set
->them up so that you can do UUCP between these 2 machines WITHOUT USING A MODEM!
->Is this possible? or will I have to use a Null modem?
->Can I do cu from machine A to machine B?
->
Sorry virginia; you will have to resort to the Dreaded Null Modem. Otherwise
you in good shape. It is easier if one system always polls the other. You
want to put a DIR device in DEVICES and use it. Have fun. You *might* have
some speed problems, so experiment with 9600, 4800, etc.
------------------------------------------------------------------------------
Neal Rhodes MNOP Ltd (404)- 972-5430
President Lilburn (atlanta) GA 30247 Fax: 978-4741
uunet!emory!jdyx!mnopltd!neal Or uunet!gatech!stiatl!mnopltd!neal
------------------------------------------------------------------------------