daveegan@dhw68k.cts.com (Dave Egan) (03/23/90)
Why can't I get the ct command to work properly on our XENIX 2.3.2
system?
What I'm Doing: Dial in to a 2400 baud modem connected to XENIX,
Get the system prompt, login,
issue the command "ct -s2400 1234567"
Answer "y" to the disconnect prompt.
Results: Line is dropped,
Modem rings at the remote PC
remote PC answers modem
Get the system prompt,
the rest is history, login is not recognized!
Our guru/consultant sez that the problem is UUCP has the line
at this time and is expecting only a UUCP dialin. He mentioned
the possibility of modifying the Kernal to wait 5 minutes before
initiating the callback, circumventing UUCP (I may have not fully
understood his explanation - blame me not him).
Does the ct command really not work or are we just screwed up?
Please reply via e-mail; I'll summarize back to net if anybody is
interested (assuming I get some sort of resolution!).
Thanks in advance.
--
Dave Egan | Radio: N6XVZ
uucp: ...{spsd,zardoz,felix}!dhw68k!daveegan |
InterNet: daveegan@dhw68k.cts.com |