csch@netcs.com (Clemens Schrimpe) (05/25/90)
tb@pem.gtc.de (Tillmann Basien) writes:
<> >We are interested in X windows on our SCO Xenix 386 systems. Can
<> >some of you that are using this comment on the product ? Does it work ?
<> >Is it sloooooowww ?? We have about 14 systems and would like to hear some
<> >feedback before dropping a large chunk of cash for the software.
<> Be careful using Xsight under SCO XENIX. It works, but not with SCO XENIX
<> NET.
They never said it would!
<> We are in trouble with SCO. SCO don't want to correct the problem an the
<> dont want to support the product.
This is not a usual "problem" - if somebody offers you a product using TCP/IP
you cannot declare YOUR problem, that it doesn't work with XYZ-NET as a problem
of the product...
<> SCO tell's, that you must upgrade to UNIX 3.2 and use Xsight. Xsigt is also
<> integratet in ODT.
You can even use Xsight under Xenix, what I do VERY SUCCESSFULLY for several
months now (this posting was done inside an xterm being displayed by the
Xsight X11 server).
It works very well and FAST ENOUGH in my opinion (I have a 16-bit VGA and
a 386 with 33MHz and Cache).
Allthough I had to tune up my system (adjusting several kernel parameters)
and to establish some device inodes etc. I had no further problems.
I even used the 1024x768 mode on an Eizo VGA successfully, but I wasn't
satisfied with the quality of my screen.
I am using Xsight Version 2.1!
regards,
Clemens Schrimpe, netCS Informationstechnik GmbH, Berlin
--
UUCP: csch@netcs.UUCP BITNET: csch@db0tui6.BITNET
INTERNET: csch@netcs.com X.25: 2624 53000 33049
PHONE: +49-30-24 42 37 FAX: +49-30-24 38 00
TELEX: 186672 net d PSI: PSI%26245300033049::CSCH