jmh@coyote.uucp (John Hughes) (10/31/90)
I need some help with the color monitor of an NCR DecisionMate PC. I recently attempted to install something other than the original guts in the case (great case), and everything worked out well, except.... I can't get the horizontal on the color monitor to sync correctly. The vertical works fine, the interface board I built for the RGB drives works fine, but the horizontal is off in the weeds. Now I get text that is about 2X too large, and wrapped way off towards the right side of the display. The original model number was: 1202-6000 ANY help would be appreciated. This thing has a really nice color CRT (inline gun, black mask, etc.), and it'd be a shame to have to toss it and start over. Many thanks. -- ============================================================================== John M. Hughes | jmh@coyote.UUCP | Programmer at large, P.O. Box 43305 | john.hughes@emdisle.fidonet.org | or large programmer. Tucson, AZ 85719 | noao!coyote!jmh | Take your choice,