shevett@mccc.uucp (Dave Shevett) (09/13/90)
I have a customer who is running an application in FoxBase (v2.1.1) under SCO Xenix 2.3.1. The configuration has a DigiBoard /8i installed, a standard 40meg HD, and 4 megs of RAM. The problem is when returning to any menu in the application, the system (about 85 percent of the time) craps out with an 'Invalid Signal Received'. no core dump, just plain stops. The other thing that may happen is my error routine will be triggered with a 'Feature Not Available' error. What am I missing? I think I set everything up ok in the config.fx file (a little extra MVARSIZE and whatnot, nothing spectacular). The system is under a light to medium load, (Load averages under 2.0). Any suggestions? /--------------------+ +----------------------\ | Dave Shevett | "The shortest distance | Labyrinth II BBS | | Lawrenceville, NJ | between two puns is a | (609) 584-8774 | | shevett@mccc.UUCP | straight line..." | 12/24/19200 PEP 24hrs| \--------------------+ - Doc Webster +----------------------/